Simply Rapt Swarovski Navette ring ch0237
After I labored with my first Swarovski Navette wire-wrapped ring, I decided that the crispness of the Navette stone also called for a simpler style. And so was born this Simply Rapt ring.
With it’s 2 hole setting, it was just a pure temptation to make a ring band that would utilize and engage the holes into a less common band style.
Construction Notes
Using 2 ball head-pins, one through each of the holes in the navette setting, and in opposite directions, I fastened them on by ending the head-pin with a wire-wrapped, closed loop. (The loops are essential to attach to band).
The band is made using 2 pieces of wire, held closely and parallel to each other. This is curved over a ring mandrel for the desired size. Then each end of the dual-wire is put through the loops formed earlier with the head-pin.
Fasten off and firmly attach to the navette stone with decorative swirls.
Work harden the wire on the band – put it over the ring mandrel and lightly but repeatedly hammer.
Ring Size: USA 5, Australia J 1/2 (1 15/16 inch, 49mm)
To Buy (if available):
- Return to Pendants, Rings, Sets gallery
- Back to top of Simply Rapt! Swarovski Navette Ring
